Browse all practice questions for the Tennessee Law Enforcement Training Academy (TLETA) Week 10 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Tennessee Law Enforcement Training Academy (TLETA) Week 10 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • When drawing a field sketch you should
  • What are the two categories of stops?
  • Which type of friction is associated with rolling motion between a ball and a surface?
  • How should you brake with conventional brakes?
  • Which of the following is NOT a defensive driving component?
  • How did law enforcement officers transition from revolvers to semi-automatic pistols in terms of capacity?
  • Latent prints are prints that are not visible without processing.
  • Which statement accurately describes patent prints?
  • How is Inertia described within laws of motion?
  • What are your two reactionary tactical options when faced with resistance?
  • Which is the pressure point located on the inside of the thigh?
  • GSR testing is correct in indicating what?
  • Which option best captures the three elements of basic gun safety?
  • Which statement best describes crime scene response in investigations?
  • The rule that something on a surface has to be measured with three measurements applies to:
  • Knee strikes are described as which type of tactic?
  • Which of the following describes hollow point bullets' purpose?
  • Which part of the curve is defined as the point of maximum turn?
  • What is a safe driver?
  • Which statement describes latent prints?
  • What is the daytime reaction time value?
  • Why should you minimize your flashlight use and use it intermittently during building clearing?
  • Static friction is defined as the force exerted between two surfaces by weight alone, standing still (most difficult).
  • What are the two most important variables in disarming?
  • Which description matches balance displacement?
  • Which two steering techniques are mentioned for maintaining control?
  • Everything we do should be ______ and pertinent to the case.
  • What is a active occupant Protection device?
  • Occupant Protection devices can be
  • What are examples of temporary evidence?
  • Does an active safety device require your action?
  • The objective reasonableness standard is assessed from the perspective of which of the following?
  • What is friction?
  • What is the first law of motion?
  • Which room entry technique involves officers on the same side and has the lead officer hooking to the right?
  • Which scenario best describes defensive driving practice?
  • Which pressure point is on the lower leg/foot?
  • Double locking handcuffs when?
  • Which statement describes patent prints?
  • Which statement is true about the objective reasonableness assessment?
  • For each piece being measured you have to have ______ measurements.
  • What is a button hook room entry?
  • Which option is NOT listed as a basic element of gun safety?
  • Fatal accidents are 2.5 times more likely to occur at which time of day?
  • Which defensive driving component involves maintaining safe following distance and spacing to provide time to react?
  • What three things must be present to make a gun safe or unsafe?
  • How many seconds does it take to perceive a hazard?
  • Which force acts away from the center in circular motion?
  • What is pain compliance?
  • What is the most effective baton strike?
  • Approximately 85% of shootouts occur at a distance of less than 21 feet between the officer and the suspect.
  • Over 60% of officer-involved shootings occur between which hours?
  • What should you use when you encounter resistance while handcuffing?
  • Which of the following is listed as a pressure point on the head and neck area?
  • In a criminal crash investigation you should
  • What are the basic elements of gun safety?
  • Which option lists all the examples of temporary evidence as described?
  • Do not overdrive your
  • What are distraction techniques?
  • Which of the following is a fundamental of marksmanship?
  • What is the recommended guidance for headlights in night driving?
  • In crash investigations, tire shadows are described as what type of evidence?
  • A semi-automatic pistol uses which device to feed ammunition?
  • We measure things so that we can________.
  • Which type of print is an impression left in a soft material?
  • Hollow point bullets are designed to
  • Which safety practice is essential before firing?
  • What should guide all measurement work?
  • What is a crisscross room entry?
  • Which of the following is a type of skid?
  • Which of the following is an intermediate weapon within levels of control?
  • Which of the following is a level of resistance?
  • Which of the following is a listed level of resistance?
  • When using conventional, what type of braking method should you use?
  • Which Tennessee Code Annotated outlines operational audio and visual emergency equipment?
  • What are the two main causes of firearm accidents?
  • Which term describes something that defeats a round?
  • Which term best describes a temporary motor impairment caused by overstimulation of the nervous system?
  • What is the most common pistol malfunction?
  • Which of the following is NOT one of the three types of individuals we handcuff?
  • Which print type is visible to the naked eye without processing?
  • Which law corresponds to the statement 'For every action there is a reaction'?
  • Which statement about latent prints is accurate?
  • What is the purpose of hollow point bullets?
  • In wet conditions, the essential function of tire tread is to
  • What three things must exist for a gun to go off?
  • Which option correctly represents the daytime reaction time value?
  • One step of sight picture/sight alignment is described as: The tip of the front sight is level with the top of the rear sight and equally spaced from left to right.
  • What does tire tread refer to?
  • What are your reactionary tactical options?
  • Which of the following lists the three components of defensive driving?
  • Centripetal force is defined as the force that acts on a body moving in a circular motion and is directed toward the center.
  • Which statement describes the difference in road friction between dry and wet conditions?
  • When are fingerprints formed?
  • Which statement best captures the deadly force standard?
  • Which of the following is a head or neck pressure point?
  • What are the only two things a driver can control?
  • What is balance displacement?
  • What are the type of room entry techniques?
  • What distance threshold is used in the shootout statistics?
  • In a two-vehicle non-central collision, the direction of force of at least one vehicle does not go through the center mass.
  • What are the three forces controlled by the driver?
  • When is a person most likely to resist?
  • How many officers should be present when searching a building?
  • If a vehicle has mass m and velocity v, its momentum is mv. If mass doubles while velocity remains constant, momentum will
  • What are the basic elements to gun safety?
  • ________% of shootouts occur outside 21 feet.
  • What is the effect of cover in a defensive scenario?
  • Which statement best describes the transfer concept in investigations?
  • What should you never do when driving at night in reference to your headlights?
  • Which statement accurately describes latent prints?
  • Which of the following is NOT a pressure point on the head and neck area?
  • In low light, how many shootings happen?
  • During handcuffing, which method is used to take down a resistant subject?
  • What is cover?
  • What is defensive driving?
  • What are the three components of defensive driving?
  • What does the One Plus One Theory state?
  • In tire terminology, what does the phrase 'material of the tire' refer to?
  • When is it appropriate to use impact weapons?
  • Which rule emphasizes muzzle direction and avoiding hazards?
  • Which statement correctly describes typical ammunition capacity differences between revolvers and semiautomatic pistols?
  • In a two-vehicle central collision, which statement best describes the impact?
  • What is included as temporary evidence in a crash investigation?
  • Who is a safety officer on the gun range?
  • Defensive driving emphasizes space management to maintain what?
  • Which option is not one of the three recognized types of prints?
  • Kinetic friction is defined as?
  • What is a reference point?
  • In crime scene photography, which factor most affects image detail?
  • Which of the following is NOT a control principle?
  • A tire mark left from a tire that is not rotating and has parallel striations is called a
  • What is the purpose of measuring crime scenes?
  • Which statement best defines inertia?
  • Which statement about officer-involved shooting timing is true?
  • Which item is an example of a passive occupant protection device?
  • In the Safety B.A.N.K mnemonic, what does the A stand for?
  • Which statement is true about defensive driving?
  • What is static friction?
  • What are the 2 types of braking systems?
  • What is the Tennessee Code Annotated (TCA) section number for deadly force?
  • What is your nighttime reaction time while driving?
  • What is an efficient driver?
  • By what factor does stopping distance increase when speed is doubled?
  • What is a fatal funnel?
  • What is the recommended following distance in a non-emergency situation?
  • What percentage of shootings occur within the hours of 1800 to 0600?
  • What are the three parts of a turn?
  • Which of the following is NOT one of the three types of friction described?
  • What are motor dysfunctions?
  • Which option lists the factors that make up max energy transfer for a strike?
  • Which statement about nighttime reaction time is correct?
  • If you have 20/20 vision in the day at night your vision is
  • What goals do vehicle maintenance accomplish?
  • What are the three components of defensive driving?
  • What defines an emergency reload?
  • Which sequence best reflects proper crime scene response workflow?
  • Which statement about the admissibility of a dying declaration is true?
  • What is centripetal force?
  • Which TCA outlines the Vanessa K Free Act and what is required under this act?
  • Which option best represents the correct sequence to recover from a skid?
  • The main purpose of tire tread is to
  • Patent prints are visible before processing or enhanced.
  • Which statement describes inertia?
  • During a tactical reload, which statement is true?
  • Which of the following is NOT a level of control?
  • Photography is
  • What is the transfer concept?
  • Which of the following is the final step in applying pressure points?
  • Acceleration and deceleration should always be
  • Reference points must be ________.
  • Which term describes windshield damage caused by impact?
  • Which of the following is NOT an active occupant protection device?
  • How many shots should you fire in a deadly force situation?
  • How does a gouge differ from a scrape?
  • What are the four types of skids?
  • How long do most shootings last?
  • What is a condition three malfunction?
  • In a turn, the apex is described as
  • Something on a surface has to be measured with ______ measurements.
  • What should be used to process paper for the presence of latent prints?
  • Which statement best describes the purpose of crime scene response protocols?
  • What describes the relationship between momentum and force according to the laws of motion?
  • First step in applying pressure points
  • Which statement best captures the importance of proper crime scene response?
  • What is stealth movement?
  • Which statement matches the acceleration concept?
  • In a deadly force situation, which statement describes the appropriate action?
  • In a room clearing operation, which member is primarily responsible for directing the suspect verbally?
  • How long does a mental stun last on average?
  • Centrifugal force is described as
  • What is the cover officers job in a room clearing situation?
  • What is action/reaction?
  • Which statement is true about range safety?
  • In firearm safety, what does the 'K' in B.A.N.K stand for?
  • Do headlights track the same as front wheels?
  • Rolling friction is defined as?
  • What are the three types of people we handcuff?
  • Which of the following lists the three forces controlled by the driver?
  • What are the three types of friction?
  • Regarding sight picture, which statement is correct?
  • What is kinetic friction?
  • What are major case prints?
  • According to the laws of motion, a body at rest will stay at rest unless acted upon by what?
  • What is friction?
  • What is a modified button hook room entry?
  • Defensive driving is best described as
  • What is rolling friction?
  • Approximately what percentage of shootings occur within 21 feet?
  • What is the most important factor in crime scene photography?
  • Who shares the responsibility for range safety?
  • The objective reasonableness test is used to determine
  • Which of the following is a pressure point usable on the head and neck area?
  • How far should your reactionary gap be when pursuing a vehicle?
  • Which term describes the tendency to resist changes in motion?
  • What are the three parts of the curve?
  • The three pistol malfunctions?
  • What does B.A.N.K stand for in reference to firearms safety?
  • What is the most conservative use of force theory?
  • How many seconds does it take to redirect the vehicle?
  • Where should gun be held when room clearing?
  • Which option correctly represents the daytime reaction time value? (alternative wording)
  • Latent print processing on paper commonly uses which chemical?
  • What windshield damage pattern describes a circular spider-like pattern observed during inspection?
  • Which statement about dying declarations is accurate under hearsay rules?
  • Which pressure point is located on the outside of the thigh?
  • What is the contact officers job in a room clearing situation?
  • Which of the following best describes gun shot residue?
  • What are examples of tangible reference points?
  • Which statement about the timing of officer-involved shootings is true?
  • Which of the following is NOT listed as a mental factor affecting driving?
  • What is your daytime reaction time while driving?
  • During skid recovery, when should brakes be applied?
  • Which braking system is described as an automated braking system?
  • When using deadly force, the threat must be so great that it doesn't matter if the person is killed
  • What is the main purpose of tire tread?
  • Which strategy reduces resistance by causing discomfort?
  • What defines a tactical reload?
  • When securing the perimeter of a crime scene, how big should it be?
  • In Newton's laws of motion, how is action related to reaction?
  • What is the difference between gouge and a scrape?
  • Which gun angle is considered correct during room clearing?
  • Which item is a tangible reference point at a crash scene?
  • Threshold braking is best described as?
  • What is mental stunning?
  • To charge someone with TCA 39-13-213, vehicular homicide, probable cause of the reckless killing of another by the operation of an automobile or any other motor vehicle, as the result of
  • Who benefits from you participating in the fundamentals of safe driving?
  • Which defensive driving component is primarily about scanning for hazards and being prepared to respond?
  • What is an erroneous identification?
  • Double locking handcuffs are primarily used to prevent what?
  • In a crisscross entry, which arrangement best describes the team?
  • What is the force that must be overcome when two bodies in contact move?
  • What is a passive occupant Protection device?
  • What is the Total Control Theory?
  • What is a condition one malfunction?
  • Which approach is recommended to maintain safe coverage during room clearing?
  • Which scenario is commonly cited as a legitimate reason to handcuff someone during transport?
  • Which is a control principle?
  • What are the 3 types of prints?
  • Which of the following statements about occupant protection devices is true?
  • Which type of friction acts when surfaces are at rest relative to each other?
  • Which statement about dying declarations in hearsay law is correct?
  • If velocity remains constant and mass doubles, momentum changes by what factor?
  • Which term describes a non-central collision between two vehicles?
  • What is centrifugal force?
  • When should you brake?
  • What is a professional driver?
  • Of the shootings that occur within 21 feet, what percent occur within 5 feet or less?
  • Defensive driving is necessary when
  • How should you turn corners when room clearing?
  • What are skid marks?
  • Regarding dying declarations, which statement is correct?
  • How should you search in a room clearing situation?
  • In the Safety B.A.N.K mnemonic, what does the N stand for?
  • Which option is NOT part of the basic elements of gun safety as described?
  • Where should you enter a building when searching?
  • How Acceleration described within laws of motion?
  • How is momentum defined?
  • In the Safety B.A.N.K mnemonic, what does the B stand for?
  • Which statement correctly distinguishes cover from concealment?
  • In a crash, which is NOT one of the three collisions?
  • What is the third law of motion?
  • Which statement accurately reflects the material's guidance on tangible reference points at crash scenes?
  • Which of the following is NOT listed as a fundamental of marksmanship?
  • A professional driver is defined as
  • How should acceleration and braking be performed?
  • What does material of road surface mean?
  • Which description about GSR evidence is accurate?
  • GSR stands for what, and how is it described?
  • What is the greatest hazard of room clearing?
  • Which is described as the most detrimental thing for shooters?
  • What are the two steering methods?
  • Which force acts toward the center in circular motion?
  • What are the four types of skids?
  • How is a criminal crash investigation treated?
  • Active protection devices vs passive protection devices are defined as
  • Which description matches that you should search from bottom to top in a room clearing?
  • Dying Declaration is defined as which of the following?
  • When are fingerprints formed, in terms of birth timing?
  • Which statement about firearm residue testing is accurate?
  • What are the three collisions in a crash?
  • In the typical pressure points sequence, which is the third step?
  • How do you demobilize a suspect using a flashlight?
  • Another step of sight picture/sight alignment: The front sight should be clear and placed on the target while maintaining the sight picture.
  • What is ABS braking?
  • What is the second law of motion?
  • What are the three types of friction?
  • Which statement about dying declarations is accurate?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy