One step of sight picture/sight alignment is described as: The tip of the front sight is level with the top of the rear sight and equally spaced from left to right.

• A. The tip of the front sight is level with the top of the rear sight and equally spaced from left to right.
• B. The front sight should be blurry while aiming.
• C. The barrel should align with the center of the target.
• D. The trigger should be pressed before aligning sights.

Answer: (C)

The key idea is sight alignment: you must position the sights in a precise relationship so the gun will shoot to where you intend. The correct description of one step in sight picture/sight alignment is that the tip of the front sight sits level with the top edge of the rear sight and is centered within the rear sight notch, with equal spacing left and right. This arrangement places the front sight in the correct plane relative to the rear sight, which is what makes the shot predictable and repeatable.

Why this matters: when the front sight is level and centered in the rear notch, the top edges form a straight line and the front sight sits directly in the middle of the rear sight. This alignment is what—oriented correctly—causes the barrel to point toward the intended point of impact when you press the trigger smoothly.

Context on focus helps too: you typically focus your vision on the front sight so it appears sharp, while the rear sight and the target are a bit blurrier. That sharp front sight is what you align with the rear sight and the target to establish the correct sight picture.

The other ideas described are not about sight alignment. Letting the front sight be blurry undermines the alignment; aiming by aligning the barrel with the target is about point of aim rather than the proper relationship of the sights; and pulling the trigger before aligning the sights disrupts accuracy and safety.